Table of Contents
Advertisement
Content Manager
Content Manager has the following functions.
f Signage playback function
g Plays still image/movie/music files in the SD card, changes brightness of the light source, and turns off/on the
power according to the registered schedule.
g Plays still image/movie files in the SD card according to the slideshow setting.
f Signage setting function
g Sets a schedule.
g Sets a slideshow.
Definitions of main terms used in this section ("Content Manager") are as follows.
Term
Content
Image content
External input content
Brightness content
Power supply content
Playlist
Timetable
Files compatible with signage playback
The signage playback function (schedule/slideshow) can use the following still image/movie/music files.
Extension
jpg/jpeg
Still
image
bmp
Extension
mov
Movie
avi
*1
mp4
mpg/mpeg
wmv
*1 To play back a schedule simultaneously in multiple projectors, use the following movie file as a movie content. If you use the movie files other than
the following, simultaneous playback function may not work properly.
For details on simultaneous playback, refer to "Playing back the schedule simultaneously in multiple projectors" (x page 182).
f Extension: mp4, Video codec: H.264/MPEG-4 AVC, Audio codec: AAC
f Extension: mpg/mpeg, Video codec: MPEG-2, Audio codec: MPEG-1/2 Audio Layer-2
*2 Following movie files are not supported.
f Files with the video codec of WMV7, WMV8, DivX, or Xvid
f Uncompressed video
f Multi-angle video
f Files with the profile of Advanced Simple Profile @ Level 0 or Advanced Simple Profile @ Level 1
Chapter 5 Operations — Content Manager
Indicates the materials registered in the Content Manager. There are four playback contents of still image/
movie/external input/music and two projector control contents of brightness/power supply.
Contents of still image/movie/music are registered in the Content Manager using still image/movie/music
files.
Indicates the corrective term of three playback contents of still image/movie/external input.
Indicates the content of the signal input to HDMI of the projector, registered in the Content Manager as a
material.
Indicates the material to change the brightness of the projector's light source.
Indicates the material to perform power on/off operation of the projector.
Indicates the multiple contents of still image/movie/external registered in the Content Manager as a single
material.
Indicates the settings of playback contents, playback time, playback order, etc. in a day.
Format
Number of pixels: Maximum 8 000 x 8 000
(For progressive JPEG, maximum 4 096 x 4 096)
JPEG
YUV format: Only YUV444, YUV422, and YUV411 supported
Color mode: Only RGB supported
Number of pixels: Maximum 2 000 x 2 000
(1-bit, 4-bit, 8-bit, 16-bit, 24-bit, and 32-bit supported)
Windows Bitmap
Following formats are not supported.
Run-length encoding, Bit fields, Top to bottom, Transparent data
Codec
Video
H.264/MPEG-4 AVC
Motion JPEG
MPEG-1/2 Audio Layer-3
H.264/MPEG-4 AVC
Motion JPEG
MPEG-4
H.264/MPEG-4 AVC
MPEG-4
MPEG-2
MPEG-1/2 Audio Layer-2
WMV9
Description
Restriction
Audio
AAC
Linear PCM
Resolution:
Maximum 1 920 x 1 080
(MP3)
Minimum 240 x 180
AAC
Frame rate:
Linear PCM
Maximum 30 fps
AAC
Bit rate:
MPEG-4 AAC-LC
Maximum 40 Mbps
WMA
Restriction
*2
Video
Audio
Sample rate:
Maximum 48 kHz
(For Linear PCM,
maximum 16 kHz)
Channel:
Maximum 2 ch
Bit rate:
Maximum 384 kbps
ENGLISH - 127
Advertisement
Table of Contents
