Table of Contents
Advertisement
Setting address for [WIRELESS LAN]
1)
Press as to select [Art-Net].
2)
Press qw to select [WIRELESS LAN].
3)
Press the <ENTER> button.
f The [Art-Net (WIRELESS LAN)] screen (1/2) is displayed.
4)
Press as to select [DEVICE IP ADDRESS].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[2.x.x.x]
[10.x.x.x]
[MANUAL]
6)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
f When [2.x.x.x] or [10.x.x.x] is selected in Step 5), proceed to Step 8).
7)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
8)
Press as to select [NEXT], and press the <ENTER> button.
f The [Art-Net (WIRELESS LAN)] screen (2/2) is displayed.
9)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[SSID]
[AUTHENTICATION]
Chapter 4 Settings — [NETWORK] menu
Sets the IP address to 2.x.x.x automatically.
Sets the IP address to 10.x.x.x automatically.
Sets the IP address manually.
Enter the net setting of the control console to be connected to the projector.
Enter the subnet setting of the control console to be connected to the projector.
Enter the universe setting of the control console to be connected to the projector.
Enter a start address where the projector processes Art-Net.
Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not
using a DHCP server.
Enter the IP address when not using a DHCP server.
Enter the subnet mask when not using a DHCP server.
Enter the default gateway address when not using a DHCP server.
Enter the primary DNS server address when not using a DHCP server.
Enter the secondary DNS server address when not using a DHCP server.
Enter the same string as the SSID registered to the access point.
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
[SHARED]
[WPA-PSK]
[WPA2-PSK]
[WPA-EAP/WPA2-EAP]
[WPA-EAP]
[WPA2-EAP]
Select this item when the authentication method of the access point
is Open System.
Select this item when the authentication method of the access point
is Shared Key.
Select this item when the authentication method of the access point
is WPA-PSK.
Select this item when the authentication method of the access point
is WPA2-PSK.
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
Select this item when the authentication method of the access point
is WPA-EAP.
Select this item when the authentication method of the access point
is WPA2-EAP.
ENGLISH - 85
Advertisement
Table of Contents
