Table of Contents
Advertisement
Hardware reference
3.4.2
LED Display
The LED display shows the following information:
/i
Information
When
IP address and sub-
Shows 3 times when you connect the Trajexia system to the power
net mask
supply.
IP address
Shows 4 times when you connect an Ethernet cable to the Ethernet
connector of the TJ2-MC__ and to a PC.
RUN
When the TJ2-MC__ operates a Servo Drive.
OFF
When the TJ2-MC__ does not operate a Servo Drive.
ERR + code
When an error occurs in the Trajexia system.
The code is the error code. Refer to troubleshooting chapter in the
Programming Manual.
HARDWARE REFERENCE MANUAL
fig. 20
73
Advertisement
Table of Contents
