Table of Contents
Advertisement
Hardware reference
Step 15
If the desired parameters of the Inverter have been set successfully,
disconnect the 3G3AX CAJOP300-EE cable or straight EtherNet cable from
the Inverter.
Push the blind cover (no.1) into place.
Note
Refer to section 2 in the RX User's Manual (Cat. No. I560) for
operations related to assembly and disassembly of the RX
Inverter.
WARNING
Never operate the Inverter with the terminal block cover or backing
plate removed.
WARNING
Provide emergency stop circuits, interlock circuits, limit circuits
and similar safety measures in external circuits (NOT in the Option
Board). This ensures safety in the system if an abnormality occurs
due to malfunction of the Option Board or another external factor
affecting the Option Board operation. Not doing so may result in
serious accidents.
WARNING
Always connect the grounding cable to one of the ground termi-
nals of the RX Inverter. Failure to abide could lead to serious or
possibly fatal injury.
Caution
Never touch the heat sink during or just after operation; it can be
very hot.
Caution
Be sure that the Option Board is mounted correctly. Improper
mounting may result in malfunction.
HARDWARE REFERENCE MANUAL
fig. 70
1
137
Advertisement
Table of Contents
