Table of Contents
Advertisement
Hardware reference
3.5.12 MECHATROLINK-II Inverter RX
The 3G3AX-RX-MRT-E allows controlling, monitoring and parameterization
fig. 55
of an RX Inverter via a MECHATROLINK-II network. The 3G3AX-RX-MRT-E
serves as a gateway that passes communicated register values from the
MECHATROLINK-II network to the RX Inverter and vice versa.
The illustration shows the external appearance of the 3G3AX-RX2-MRT-E
Unit.
A. Option board Inverter connector
B. LED indicators (RUN, ERR, RX, TX)
C. Option Board Cable
D. Fieldbus connector
E. Grounding cable
F. Housing
G. Mounting screw
Four LED indicators allow easy diagnosis. An attached grounding cable is
sized to reach the ground terminals on all RX Inverter models. A feature in
the housing will retain the mounting screw when the Option Board is not
mounted to the Inverter. Please pay special attention to the Option Board
connector: It must be properly connected with the Inverter when the Option
Board is mounted.
HARDWARE REFERENCE MANUAL
127
Advertisement
Table of Contents
