Setup Using A Web Browser; Setting The Browser - Contec FXE3000 Series User Manual

Setup Using a Web Browser

Start up a Web browser and enter the IP address of this product after "http://" in the address bar.
If connecting for the first time, enter the default IP address. When the default setting IP address is
192.168.0.1, enter as follows.
http://192.168.0.1/
Enable the JavaScript function in the browser setting as it is used.
Supported web browsers (recommended)
-
Microsoft Internet Explorer 11 or higher
- Mozilla Firefox 37.0 or higher

Setting the Browser

You may have to change the browser settings as well as the IP address and subnet mask for the PC to be
connected to this product via the network.
Changing browser settings
(1) Proxy Settings
Networks at companies and schools may use browsers with proxy settings. Proxy is not required as
a PC is used to set up the product, which is on a local network. Disable the proxy settings
temporarily when setting up this product on a Web browser.
The following example settings are for Internet Explorer, or Firefox.
Actual settings will depend upon the environment you are using. For details, see your web
browser's help information or contact the software manufacturer.
- Internet Explorer
(1) Launch Internet Explorer.
(2) From the [Tools] menu, select [Internet Options], and
then click the [Connections] tab.
(3) In the dial-up settings area, select "Never dial a
connection".
* If the option is grayed-out, go to the next step.
(4) Click [LAN Settings].
FXE3000 Series
3. Connection to Devices and Setup Methods
19