Wlan - Contec FXE3000 Series User Manual

4. Setup and Status Display
Default Gateway
This displays the IP address of the standard connected gateway. When not configured (00-00-00-00-00-
00), nothing is shown.

WLAN

▼
Basic Information (Access Point)
Shown when the unit type is access point.
WLAN Standard
Shows the configured wireless networking standard.
Dual Channel (Bandwidth)
Shows the bandwidth when the configured wireless networking standard is IEEE 802.11n. When dual
channel mode is disabled, 20 MHz is shown. When enabled, 40 MHz is shown.
WLAN Infrastructure Mode
Shows the configured wireless connection mode.
Wireless MAC Address
Shows the wireless MAC address.
Channel
Shows the configured channel.
(VAP) Wireless MAC Address
Shows the wireless MAC address for each VAP. From VAP2 onward, the value is not displayed when
the VAP is disabled.
53
FXE3000 Series