I/O Interface - Contec FXE3000 Series User Manual

8. Appendix

I/O Interface

Pin Layout of LAN Port
Signal name
Pin No.
TX+
1
TX-
2
RX+
3
INIT/NC
4
GND
5
RX-
6
24VDC
7
GND
8
Pin assignment of power connector
Housing : JST S02B-PASK-2(LF) (SN)
Cable : AWG28-16(equivalent to it)
Pin No. Signal name
1 Vi+
2 Vi-
Pin assignment of DC Jack (EIAJ#2)
Pin Sign
Center Input power*
Periphery GND
* DC jack is a EIAJ#2-standards connector, so please use it within the range of DC4.5V - 6.3V.
102
Transmit (+)
Transmit (-)
Receive (+)
Short the INIT signal with the GND so that the POWER, WLAN, and LAN LEDs will
flash. Then if you open the INIT signal before the LEDs turn on (approx. 3 seconds), the
settings are restored to the default settings the next time the product is started.*1
* Usable when JP2 No. 1 and No. 2 are connected.
GND
Receive (-)
Power Supply
GND
Operation / Function
5-30VDC ± 5%
GND
Operation / Function
FXE3000 Series