Table of Contents
Advertisement
8. Appendix
Factory Default Settings List
Table 8.1. Initial Setting List (1/13)
Item
Basic setting
Network
DHCP Client
IP Address
Subnet Mask
Default Gateway
Language
Time Zone
Radio
WLAN Interface
Unit Type
Repeater Independent *1
WLAN Standard
Dual Channel Mode *3
Channel *4
WLAN Infrastructure Mode
TX Power
Antenna *5
*1 :
This setting is available when the unit type is "Repeater".
*2 :
This setting is available when the unit type is "Station".
*3 :
This setting is available when the unit type is "Access Point" or "Repeater" and the wireless networking standard is
"IEEE802.11n(5GHz)" or "IEEE802.11n(2.4GHz)".
*4 :
This setting is available when the unit type is "Access Point" or "Repeater".
*5 :
This setting can only be configured when the wireless networking standard is "IEEE802.11a", "IEEE802.11b", or
"IEEE802.11g".
FXE3000 Series
Disable , Enable
192.168.0.1
255.255.255.0
0.0.0.0
English, Japanese
EST+5, EDT+4, CST+6, CDT+5, MST+7, MDT+6, PST+8, PDT+7,
AKST+9, AKDT+8, HAST+10, WET+0, WEST+1, CET-1, CEST-2,
EET-2, EEST-3, TST-8, CST-8, KST-9, JST-9
Enable , Disable
Station, AccessPoint, Repeater
Enable , Disable
Auto*2, IEEE802.11n (5GHz), IEEE802.11n (2.4GHz)
IEEE802.11a, IEEE802.11b, IEEE802.11g
Disable , Enable
Varies depending on the country in which the product is used.
Compatible Infrastructure ,
Standard Infrastructure,
Advanced Infrastructure*4
MAX, 50%, 25%, 12%
Auto, Fixed (Antenna :1)
Specification
8. Appendix
85
Advertisement
Table of Contents
