Notes On Radio Interface - Contec FXE3000 Series User Manual

1. Introduction

Notes on Radio Interface

The 2.4 GHz band used by this product covers the operating frequencies of mobile-identification local
radio stations (requiring the license), specific low-power radio stations (requiring no license) and amateur
wireless stations (requiring the license) as well as industrial, scientific, and medical equipment such as
microwave ovens.
1. Before using this product, make sure that there is no mobile-identification local radio station, specific
low-power radio station and amateur wireless station operating near the product.
2. If the product should cause radio interface with any mobile-identification local radio station or
specific low-power radio station, immediately change the operating frequency to avoid the radio
interface.
3. Placing wireless terminals near each other may slows down their data rate because of their mutual
interference. You should allow a minimum clearance of about 1m between stations, 3m between
access point and station, and 3m between access points.
4. Contact your local retailer or CONTEC if the product has trouble such as recurrent radio interface
with mobile-identification local radio stations or specific low-power radio stations
4
FXE3000 Series