Using Ftp To Get The Log File - Contec FXE3000 Series User Manual

6. Maintenance

Using FTP to Get the Log File

Log files that use the FTP are collected according to the following procedure.
(1) Move to the folder in which you wish to save the file.
(2-1) Run FTP to log in to the AP.
(2-2) Run FTP to log in to the AP. (Enter FTP user's name)
(2-3) Run FTP to log in to the AP. (Enter FTP password)
(3) Transfer the log file.
(4) Exit FTP.
The following is an example for the time when Windows Command Prompt (MS - DOS Prompt) is used.
In this example, the file will be moved to the saving folder D : ¥tmp and LOGFILE will be collected after
connecting to this product via FTP. The example assumes the User as admin (blank is OK), Password as
Pass (initial setting) and the IP address as 192.168.0.1.
C:¥>cd D:¥tmp
D:¥tmp>ftp 192.168.0.1
User (192.168.0.1:none)):admin
Password:pass
ftp>get LOGFILE
ftp>bye
* For details about downloading using a Web browser, see the section titled "Download" in Chapter 4
"Setup and Status Display".
78
............ (1)
............ (2-1)
............ (2-2)
............ (2-3)
............ (3)
............ (4)
FXE3000 Series