Snmp - Contec FXE3000 Series User Manual

4. Setup and Status Display

SNMP

▼
Common Settings
SNMP Agent
To enable the device's SNMP agent function, set to "Enable".
This device can be accessed by an external SNMP manager and its MIB can be acquired by enabling the
SNMP agent function.
Default setting : Disable
Community Name
Set the SNMP authentication string, called the community name, as alphanumeric characters between 1
and 32 characters in length.
The SNMP authentication string works like a password for accessing the device when using SNMP. The
SNMP manager can access this device's MIB by using the community name.
Default setting : public
sysContact
Set the address for the system contact as alphanumeric characters d with a maximum length of 32
characters. It is okay to leave this value blank.
Default setting : Unknown
sysName
Set the SNMP name for the device as alphanumeric characters with a maximum length of 32 characters.
It is okay to leave this value blank.
Default setting : Unknown
45
FXE3000 Series