Dfs Function - Contec FXE3000 Series User Manual

DFS function

When set to DFS-supported channels (5 GHz only), if radar waves are detected, the channel must be
changed in order to avoid radio wave interference with weather radars and other radars, so note the
following.
CAUTION
- After starting, the channel is checked for radar waves for one minute, so at a minimum, one minute
or longer is required.
- If radar waves are detected during startup or while started, the access point may start on another
channel since it must use a channel different from the set channel.
- Even after starting with the set DFS-supported channel, the channel may change while running.
- If radar waves are detected, the radio waves must stop for 30 minutes, so the detected channel cannot
be used for 30 minutes.
- DFS-supported channels (5 GHz only) are different depending on countries.
FXE3000 Series
2. Setup
15