Wan Connection Configuration - ZyXEL Communications P8802T User Manual

4.4.1 WAN Connection Configuration

Click the Edit or Add button in the WAN Service screen to configure a WAN connection.
4.4.1.1 WAN Interface
This screen displays when you add a new WAN connection.
Figure 21 WAN Configuration: WAN Interface
The following table describes the labels in this screen.
Table 18 WAN Configuration: WAN Interface
LABEL
Select a layer 2
interface for this
service
Back
Next
4.4.1.2 Service Type
If you set the DSL link type to PPPoA or IPoA for the ATM interface and configure a WAN
connection using the ATM interface, you only need to configure the Enter Service Description
field in this screen.
Basic Home Station VDSL2 P8802T User's Guide
DESCRIPTION
Select ptmx to use the DSL port as the WAN port and use the VDSL
technology for data transmission.
Select atmx or ipoax (where x starts from 0 and is the index number of ATM
layer-2 interfaces using different VPI and/or VCI values) to use the DSL port as
the WAN port and use the ADSL technology for data transmission.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 4 WAN
85