ZyXEL Communications P8802T User Manual page 96

Chapter 4 WAN
Table 25 WAN Configuration: DNS Server: PPPoE or IPoE
LABEL
Available WAN
Interfaces
Use the following
Static DNS IP
address
Primary DNS
server
Secondary DNS
server
Obtain IPv6 DNS
info from a WAN
interface
WAN Interface
selected
Use the following
Static IPv6 DNS
address
Primary IPv6
DNS server
Secondary IPv6
DNS server
Back
Next
4.4.1.7 Configuration Summary
This read-only screen shows the current WAN connection settings.
Figure 30 WAN Configuration: Configuration Summary
The following table describes the labels in this screen.
Table 26 WAN Configuration: Configuration Summary
LABEL
Connection Type
NAT
Full Cone NAT
IGMP Multicast
Quality Of Service
96
DESCRIPTION
These are the WAN interfaces you can select from.
Select this to have the VDSL Router use the DNS server addresses you configure
manually.
Enter the first DNS server address assigned by the ISP.
Enter the second DNS server address assigned by the ISP.
Select this to have the VDSL Router get the IPv6 DNS server addresses from the ISP
automatically.
Select a WAN interface through which you want to obtain the IPv6 DNS related
information.
Select this to have the VDSL Router use the IPv6 DNS server addresses you configure
manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
This is the encapsulation method used by this connection.
This shows whether NAT is active or not for this connection.
This shows whether full cone NAT is active or not for this connection.
This shows whether IGMP multicasting is active or not for this connection.
This shows whether QoS is active or not for this connection.
Basic Home Station VDSL2 P8802T User's Guide