Before You Begin - ZyXEL Communications P8802T User Manual

Figure 61 File Sharing Overview
A
The VDSL Router will not be able to join the workgroup if your local area network has
restrictions set up that do not allow devices to join a workgroup. In this case, contact your
network administrator.

12.2.1 Before You Begin

Make sure the VDSL Router is connected to your network and turned on.
Connect the USB device to one of the VDSL Router's USB port. Make sure the VDSL Router is
1
connected to your network.
The VDSL Router detects the USB device and makes its contents available for browsing. If you are
2
connecting a USB hard drive that comes with an external power supply, make sure it is connected
to an appropriate power source that is on.
Note: If your USB device cannot be detected by the VDSL Router, see the troubleshooting
for suggestions.
Use this screen to set up file sharing using the VDSL Router. To access this screen, Click Advanced
Setup > USB Services > File Sharing.
Basic Home Station VDSL2 P8802T User's Guide
B
C
Chapter 12 USB Services
163