Table of Contents
Advertisement
8.4.1 Adding a QoS Queue
Click the QoS Queue Setup screen's Add button to configure a new queue.
Figure 47 QoS Queue Setup: Add
The following table describes the labels in this screen.
Table 41 QoS Queue Setup: Add
LABEL
Name
Enable
Interface
Queue
Precedence
Basic Home Station VDSL2 P8802T User's Guide
DESCRIPTION
Enter the descriptive name of this queue.
Enable or disable this queue.
Select the interface to which this queue is applied.
Select the precedence level (from 1 to 8) of this queue. The smaller the number, the higher
the priority level. Traffic assigned to higher priority queues gets through faster while traffic
in lower priority queues is dropped if the network is congested.
The precedence list shows the scheduler algorithm for each precedence level. The scheduler
algorithm depends on the interface. Ethernet interfaces use strict priority (SP). ATM and
PTM interfaces use the scheduler algorithm configured for the interface (weighted round
robin or weighted fair queuing).
The VDSL Router uses the algorithm to service queues with the same precedence.
The VDSL Router uses strict priority to service queues with different precedences.
Chapter 8 Quality of Service (QoS)
131
Advertisement
Table of Contents
