ZyXEL Communications P8802T User Manual page 134

Chapter 8 Quality of Service (QoS)
Figure 49 QoS Classification Setup: Add
The following table describes the labels in this screen.
Table 43 QoS Classification Setup: Add
LABEL
Traffic Class
Name
Rule Order
Rule Status
Specify
Classification
Criteria
Class Interface
Ether Type
Source MAC
Address
134
DESCRIPTION
Enter a descriptive name of up to 15 printable English keyboard characters, not including
spaces.
Select an existing number for where you want to put this classifier to move the classifier to
the number you selected after clicking Apply.
Select Last to put this rule in the back of the classifier list.
Enable or disable this classifier.
Configure these fields to identify the traffic to which the class applies. The fields available
vary depending on the selected interface and Ether type. Leave a field blank to not apply
that criterion.
Select the ingress interface to which the classifier applies.
Select the predefined application (IP, ARP, IPv6, PPPoE discovery, PPPoE session, 8865,
8866, or IEEE 802.1q) to which the classifier applies. The list of types available to choose
from varies depending on the selected interface.
Enter a MAC address to apply the classifier to packets from that MAC address.
Basic Home Station VDSL2 P8802T User's Guide