Pppoe Mode (In The Following Example To Configure A Pppoe Connection, The Adsl Wan Interface Is Used.) - ZyXEL Communications P-2812HNU-51c Support Notes

PPPoE Mode (In the following example to configure a PPPoE connection,
the ADSL WAN interface is used.)
In this example, how to create one PVC in ADSL interface is also demonstrated. By
default, ADSL WAN interface has only one PVC which is 8/35 and in default mode. If
multiple PVCs are required, separate individual PVC should be configured.
1. Go to Network> WAN > Layer2 Interface.
2. Select ATM from the Interface drop down list. And Click on "Add".
3. Configure new PVC' s VCI/PCI(0/34), and Select DSL Link Type EoA (EoA is for
PPPoE, IPoE, and Bridge.)
4. Select Connection Mode (Default Mode).
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes