Table of Contents
Advertisement
Table 19 WAN Configuration: Service Type
LABEL
Network Protocol
Selection
Back
Next
4.4.1.3 WAN IP Address and DNS Server
The screen differs by the encapsulation you selected in the previous screen. See
page 99
for more information.
PPPoE or PPPoA
This screen displays when you select PPP over Ethernet (PPPoE) in the WAN Service
Configuration screen or set the DSL link type to PPPoA for the ATM interface and configure a
WAN connection using the ATM interface.
Basic Home Station VDSL2 P8802T User's Guide
DESCRIPTION
Select IPv4 Only to have the VDSL Router use only IPv4.
Select IPv4&IPv6(Dual Stack) to let the VDSL Router connect to IPv4 and IPv6
networks an choose the protocol for applications according to the address type. This lets
the VDSL Router use an IPv6 address when sending traffic through this connection. You
can only select this for a WAN service that uses the PPPoE or IPoE encapsulation method
over the ATM or PTM interface.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 4 WAN
Section 4.6 on
87
Advertisement
Table of Contents
