Table of Contents
Advertisement
Chapter 4 WAN
The following table describes the fields in this screen.
Table 15 Layer-2 Interface: PTM
LABEL
Interface
DSL Latency
PTM Priority
Conn Mode
IP QoS
Remove
Add
4.3.1 Layer-2 PTM Interface Configuration
Click the Add button in the Layer2 Interface: PTM screen to open the following screen. Use this
screen to create a new layer-2 interface.
Figure 19 DSL PTM Interface Configuration
82
DESCRIPTION
The name of a configured layer-2 interface.
This displays whether the ATM interface uses interleave delay (Path1) or fast mode with
no interleave delay (Path0).
This does not apply at the time of writing.
This shows the connection mode of the layer-2 interface.
This displays whether QoS (Quality of Service) is enabled on the interface.
Select an interface and click the Remove button to delete it. You cannot remove a layer-
2 interface when a WAN service is associated with it.
Click this button to create a new ATM layer-2 interface.
Basic Home Station VDSL2 P8802T User's Guide
Advertisement
Table of Contents
