ZyXEL Communications P8802T User Manual page 250

Chapter 19 TR-069 Client
Figure 108 TR-069 Client
The following table describes the fields in this screen.
Table 91 TR-069 Client
LABEL
Inform
Inform Interval
ACS URL
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
WAN Interface
used by TR-069
client
Display SOAP
messages on
serial console
Connection
Request
Authentication
Connection
Request User
Name
Connection
Request
Password
250
DESCRIPTION
Select Enable for the VDSL Router to send periodic inform via TR-069 on the WAN.
Otherwise, select Disable.
Enter the time interval (in seconds) at which the VDSL Router sends information to the auto-
configuration server.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 password for authentication with the auto-configuration server.
Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, you should also select the pre-configured WAN connection(s).
Select Enable to show the SOAP messages on the console.
Select this option to enable authentication when there is a connection request from the ACS.
Enter the connection request user name.
When the ACS makes a connection request to the VDSL Router, this user name is used to
authenticate the ACS.
Enter the connection request password.
When the ACS makes a connection request to the VDSL Router, this password is used to
authenticate the ACS.
Basic Home Station VDSL2 P8802T User's Guide