Wpa-Psk Or Wpa2-Psk Security; Connection Wizard: Step 3: Internet Configuration - ZyXEL Communications NBG-416N User Manual

3.3.1 WPA-PSK or WPA2-PSK Security

Choose WPA-PSK or WPA2-PSK security in the Wireless LAN setup screen to set
up a Pre-Shared Key.
Figure 11 Wizard Step 2: WPA-PSK or WPA2-PSK Security
The following table describes the labels in this screen.
Table 5 Wizard Step 2: WPA-PSK or WPA2-PSK Security
LABEL
Pre-Shared
Key
Back
Next
Exit
3.4 Connection Wizard: STEP 3: Internet
Configuration
The NBG-416N offers three Internet connection types. They are Ethernet, PPP
over Ethernet or PPTP. The wizard attempts to detect which WAN connection
type you are using. If the wizard does not detect a connection type, you must
select one from the drop-down list box. Check with your ISP to make sure you use
the correct type.
NBG-416N User's Guide
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII or HEX characters. You can set up
the most secure wireless connection by configuring WPA in the wireless
LAN screens. You need to configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Connection Wizard
27