Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 42 QoS Classification Setup
LABEL
Class Name
Order
CLASSIFICATION
CRITERIA
Class Intf
Ether Type
SrcMAC/ Mask
DstMAC/ Mask
SrcIP/ PrefixLength
DstIP/ PrefixLength
Proto
SrcPort
DstPort
DSCP Check
802.1P Check
CLASSIFICATION
RESULTS
Queue Key
DSCP Mark
802.1P Mark
Forward Inft
Rate Limit(kbps)
Enable
Remove
Add
8.5.1 Add QoS Classification Rule
Click Add new Classifier in the Class Setup screen or the Edit icon next to a classifier to open
the following screen.
Basic Home Station VDSL2 P8802T User's Guide
DESCRIPTION
This displays the name of the classifier rule.
This displays the rule's place in the list of classifier rules. The VDSL Router checks traffic
against classifiers in order until it matches one.
These fields show the criteria specified in the classifier rule. For example the interface
from which traffic of this class comes and the source MAC address of traffic that
matches this classifier.
This displays the ingress interface to which the classifier applies.
This displays the type of Ethernet frames to which the classifier applies.
This displays the source MAC and network mask of traffic to which the classifier applies.
This displays the destination MAC and network mask of traffic to which the classifier
applies.
This displays the source IP address and prefix length of traffic to which the classifier
applies.
This displays the destination IP address and prefix length of traffic to which the classifier
applies.
This displays the protocol of traffic to which the classifier applies.
This displays the source port of traffic to which the classifier applies.
This displays the destination port of traffic to which the classifier applies.
This displays the DSCP mark of traffic to which the classifier applies.
This displays the IEEE 802.1p priority level of traffic to which the classifier applies.
These fields show the changes the classifier rule applies to matching traffic.
This displays the number of the queue to which the VDSL Router adds traffic that
matches this classifier.
This displays the DSCP mark the VDSL Router adds to traffic that matches this classifier.
This displays the IEEE 802.1p priority level the VDSL Router assigns to traffic that
matches this classifier.
This displays the interface through which the VDSL Router forwards traffic that matches
this classifier. Unchange means the VDSL Router forwards traffic of this class according
to the default routing table.
This displays the rate limit (if any) that the VDSL Router applies to traffic that matches
this classifier.
Select an entry's Enable option and click the Enable button to turn it on.
Select an entry's Remove option and click the Remove button to delete it.
Click this button to create a new classifier rule.
Chapter 8 Quality of Service (QoS)
133
Advertisement
Table of Contents
