Table of Contents
Advertisement
Chapter 16 Diagnostic
16.3 Diagnostics
Click Diagnostics to open the screen shown next. Use this screen to test the VDSL Router's
connections.
Figure 100 Diagnostics
• Click Next Connection to test the next WAN connection.
• Click Test to perform the test again.
• Click Test With OAM F4 with to perform an OAM (Operation, Administration and Maintenance)
F4 loopback test on an ATM PVC.
Note: The DSLAM to which the VDSL Router is connected must also support OAM F4 to
use the OAM F4 loopback test.
16.4 802.1ag Connectivity Fault Management
Click Diagnostics > Fault Management to open the following screen. Use this screen to perform
CFM actions.
238
Basic Home Station VDSL2 P8802T User's Guide
Advertisement
Table of Contents
