The Arp Table Screen - ZyXEL Communications LTE3202-M430 User Manual

Click Monitor > DHCP Table to open this screen. Read-only information here relates to your DHCP status.
The DHCP table shows current DHCP client information (including MAC Address, and IP Address) of all
network clients using the LTE3202-M430's DHCP server.
Figure 12 Monitor > DHCP Table
The following table describes the labels on this screen.
Table 8 Monitor > DHCP Table
LABEL
No.
Status
Host Name
IP Address
MAC Address
Reserve
Apply
Cancel

5.5 The ARP Table Screen

Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
network. Use the ARP table to view IP-to-MAC address mapping(s).
Click Monitor > ARP Table to open the following screen.
Figure 13 Monitor > ARP Table
Chapter 5 Monitor
DESCRIPTION
This is the index number of the entry.
This field displays whether the connection to the host computer is up (a lit bulb) or
down (a gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
This field shows the MAC address of the computer with the name in the Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which
uniquely identifies a device. The MAC address is assigned at the factory and consists
of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Select this if you want to reserve the IP address for this specific MAC address.
Click Apply to save your changes back to the LTE3202-M430.
Click Cancel to reload the previous configuration for this screen.
LTE3202-M430 User's Guide
29