Wizards - Siemens SITRANS L LU240 Compact Operating Instructions

Commissioning
7.2 Local commissioning
7.2.7

Wizards

Note
Complete parameter list
For a complete list of parameters with instructions, and dimension drawings, see the full
operating instructions.
Quick commissioning wizard
The SITRANS Probe LU240 provides a single quick commissioning wizard that can be used
for various applications.
The initial wizard steps are common for all application types. Subsequent wizard parameters
will vary depending on the application you choose. For the purpose of documenting, three
separate lists follow. These lists include the wizard parameters available to commission each
application type (see links below).
1. From measurement view, press
(QUICK START) will display. Press
2. Press
In the wizard, it is not necessary to press
step, you are taken directly to edit view.
3. Set "Operation", then "Material type".
Subsequent wizard parameters will vary depending on the application you choose. See
links below to step you through the wizard appropriate to your application.
4. Select "Yes" to confirm all parameter changes as the final step in the quick commissioning
wizard, and return to parameter view. "DONE" will appear on the main line of the display.
5. Press
For more information about commissioning a Level, Space, Distance or Custom application,
go to Quick commissioning: Level/Space/Distance/Custom (Page 35).
For more information about commissioning a Volume application, go to Quick commissioning:
Volume (Page 40).
For more information about commissioning a Volume flow application, go to Quick
commissioning: Volume flow (Page 41).
34
button again to enter "Quick commissioning wizard" (COMMISSION).
button three times to return to measurement view.
button to enter parameter view. The first level menu
button to enter this menu.
button to navigate to the next step. In each
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 10/2018, A5E42673704-AB