In SIMATIC PDM, open the menu View - Device Status (PROFIBUS PA) or View
– Status (HART), click on the Maintenance tab and check the Calibration
Interval window.
6.4.7. Acknowledge (ACK STATUS)
Read only: displays the status of the Maintenance Alerts that have been
acknowledged.
Options
(read only)
In SIMATIC PDM, open the menu View - Device Status (PROFIBUS PA) or View
– Status (HART), click on the Maintenance tab and check the Calibration
Interval window.
6.4.8. Acknowledge Warnings (ACK)
Allows you to acknowledge either a Maintenance Required or a Maintenance
Demanded alert.
In SIMATIC PDM:
a. Open the menu View - Device Status (PROFIBUS PA) or View – Status
(HART), and click on the Maintenance tab.
b. In the Calibration Interval window, click on Acknowledge Warnings.
Options (read only)
7. Condensed Status Setup (COND SETUP) (PROFIBUS PA only)
This device conforms with PROFIBUS Profile for Process Control Devices version 3.01.
Condensed Status was introduced in this version. The following sections allow the user
to set the level of severity of the errors listed and to tailor a device response appropriate
for your particular process.
7.1. Condensed Status Mode (COND STAT)
Options
Select Yes or No to enable/disable Condensed Status Mode.
7.2. Features Supported (FEAT SUP) (Read only)
Features supported are:
•
Condensed Diagnostics
•
Extended Diagnostics
•
Application Relationships
7.3. Features Enabled (FEAT EN) (Read only)
Page 88
NONE
ACK M REQ Maintenance Required Acknowledged
ACK M DEM Maintenance Demanded Acknowledged
BOTH
IGNORE
ACK WARNING
*
NO
YES
SITRANS LR460 – INSTRUCTION MANUAL
None
Both Maintenance Required and Demanded
Acknowledged
Disabled
Enabled
A5E42035355