Crestron TSS-70 Series Product Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Touchscreen
  5. TSS-70 Series
  6. Product manual

Crestron TSS-70 Series Product Manual

7 in. and 10.1 in. room scheduling touch screens
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TSS-70 Series
7 in. and 10.1 in. Room Scheduling Touch
Screens
Product Manual
Crestron Electronics, Inc.

Advertisement

Table of Contents
loading

Related Manuals for Crestron TSS-70 Series

Summary of Contents for Crestron TSS-70 Series

  • Page 1 TSS-70 Series 7 in. and 10.1 in. Room Scheduling Touch Screens Product Manual Crestron Electronics, Inc.
  • Page 2 Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

  • Page 3: Table Of Contents

    Contents Overview Features TSS-770 Features TSS-770-T Features TSS-1070 Features TSS-1070-T Features Physical Description Specifications TSS-770 Specifications Product Specifications Dimension Drawings TSS-770-T Specifications Product Specifications Dimension Drawings TSS-1070 Specifications Product Specifications Dimension Drawings TSS-1070-T Specifications Product Specifications Dimension Drawings Installation Install the Mounting Bracket Electrical Box Mounting Drywall Mounting Install the Security Bracket (Optional)
  • Page 4 Virtual Toolbar Diagnostics & Advanced About Web Configuration Actions Menu Status Settings Security 802.1x Configuration Application Selection Connect to XiO Cloud Service Operation Resources Crestron Support and Training Programmer and Developer Resources Related Documentation iv • Contents Product Manual — Doc. 8745D...

  • Page 5: Overview

    NOTE: The TSS-770 and TSS-1070 are functionally similar. For simplicity within this documentation, the term "touch screen" is used except where otherwise noted. Crestron offers the following variations for its standard touch screen models. Certain settings described in this document are not applicable to these models.

  • Page 6: Features

    TSS-770 Features Crestron® TSS-770 series touch screens are designed to enhance and simplify room scheduling across an enterprise. The TSS-770 installs near a meeting room or huddle space to provide a clear indication of its availability and scheduling and integrates seamlessly with a variety of popular scheduling services.
  • Page 7 Crestron Room Scheduling App The native Crestron Scheduling app helps to maximize productivity and manage usage for meeting spaces. If desired, the room can be reserved on the spot for an ad hoc meeting. A CEN-ODT-C-POE occupancy sensor (sold separately) can also be paired to the touch screen, allowing for occupancy status to be reported instantly to the scheduling app for no-shows and unscheduled room usage.
  • Page 8 The built-in Bluetooth® proximity detection beacon works with the Crestron Go App and Crestron App to determine when a mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
  • Page 9 TSW-770/1070-RMB-1 andTSW-770/1070-RMB-2 retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
  • Page 10 1. Actual functionality and onscreen appearance varies based on which scheduling app is in use and how the app is set up. The functionality described in this spec sheet generally refers to the Crestron Scheduling app. Each third- party provider determines the functionality and appearance of their respective app. Refer to each provider’s website for more information.

  • Page 11: Tss-770-T Features

    TSS-770-T Features Crestron® TSS-770-T series touch screens are designed to enhance and simplify room scheduling across an enterprise. The TSS-770-T installs near a meeting room or huddle space to provide a clear indication of its availability and scheduling and integrates seamlessly with the Microsoft Teams®...
  • Page 12 Wi-Fi® communications via a local wireless access point (WAP). Versatile: Crestron offers a variety of mounting options for mounting the TSS-770-T to drywall, masonry, glass, mullions, and other surfaces. Optional light bar and hallway sign accessories are available to increase the visibility of the room availability status.
  • Page 13 The built-in Bluetooth® proximity detection beacon works with the Crestron Go App and Crestron App to determine when a mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
  • Page 14 4. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.

  • Page 15: Tss-1070 Features

    TSS-1070 Features Crestron® TSS-1070 series touch screens are designed to enhance and simplify room scheduling across an enterprise. The TSS-1070 installs near a meeting room or huddle space to provide a clear indication of its availability and scheduling and integrates seamlessly with a variety of popular scheduling services.
  • Page 16 Crestron Room Scheduling App The native Crestron Scheduling app helps to maximize productivity and manage usage for meeting spaces. If desired, the room can be reserved on the spot for an ad hoc meeting. A CEN-ODT-C-POE occupancy sensor (sold separately) can also be paired to the touch screen, allowing for occupancy status to be reported instantly to the scheduling app for no-shows and unscheduled room usage.
  • Page 17 The built-in Bluetooth® proximity detection beacon works with the Crestron Go App and Crestron App to determine when a mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
  • Page 18 1. Actual functionality and onscreen appearance varies based on which scheduling app is in use and how the app is set up. The functionality described in this spec sheet generally refers to the Crestron Scheduling app. Each third- party provider determines the functionality and appearance of their respective app. Refer to each provider’s website for more information.

  • Page 19: Tss-1070-T Features

    TSS-1070-T Features Crestron® TSS-1070-T series touch screens are designed to enhance and simplify room scheduling across an enterprise. The TSS-1070-T installs near a meeting room or huddle space to provide a clear indication of its availability and scheduling and integrates seamlessly with the Microsoft Teams®...
  • Page 20 Wi-Fi® communications via a local wireless access point (WAP). Versatile: Crestron offers a variety of mounting options for mounting the TSS-1070-T to drywall, masonry, glass, mullions, and other surfaces. Optional light bar and hallway sign accessories are available to increase the visibility of the room availability status.
  • Page 21 The built-in Bluetooth® proximity detection beacon works with the Crestron Go App and Crestron App to determine when a mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
  • Page 22 4. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.

  • Page 23: Physical Description

    Physical Description The TSS-70 Series provides the following connectors and indicators. TSS-770 and TSS-1070 Series Connectors Connectors and Indicators LAN PoE (1) 8-pin RJ-45 connector, female, with 2 LED indicators; 100BASE-TX Ethernet port; PoE+ PD port; Green and yellow LEDs indicate Ethernet port status (2) USB Type A connectors, female;...

  • Page 24: Specifications

    Refer to the following sections for more information on the specifications for various TSS-70 Series models. TSS-770 Specifications (on page 21) TSS-770-T Specifications (on page 26) TSS-1070 Specifications (on page 31) TSS-1070-T Specifications (on page 36) 20 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 25: Tss-770 Specifications

    Product specifications for the TSS-770 are provided below. Product Specifications Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365® software, Google Calendar™ calendaring app and G Suite™ software, CollegeNET® 25Live® software, and Ad Astra™ software (IBM® Notes® software...
  • Page 26 Requests 15.4 W (PoE Class 0) from an 802.3af (or 802.3at Type 1) PSE Environmental Temperature 32 to 104 °F (0 to 40 °C) Humidity 10% to 95% RH (noncondensing) Heat Dissipation 44 BTU/hr 22 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 27 1.99 in. (51 mm) Dimensions do not include the mounting bracket or add-on accessories Weight 14.11 oz (400 g) Compliance Regulatory Model: M201923002 IC, CE, FCC Part 15 Class B digital device Product Manual — Doc. 8745D TSS-70 Series • 23...

  • Page 28: Dimension Drawings

    Dimension Drawings 24 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 29 1. Actual functionality and onscreen appearance varies based on which scheduling app is in use and how the app is set up. The functionality described in this spec sheet generally refers to the Crestron Scheduling app. Each third- party provider determines the functionality and appearance of their respective app. Refer to each provider’s website for more information.

  • Page 30: Tss-770-T Specifications

    16:10 WXGA Resolution 1280 x 800 pixels Brightness 350 nits (cd/m Contrast 850:1 Color Depth 24 bit, 16.7M colors Illumination Edgelit LED with auto brightness control Viewing Angle ±80° horizontal, ±80° vertical 26 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 31 Requests 15.4 W (PoE Class 0) from an 802.3af (or 802.3at Type 1) PSE Environmental Temperature 41 to 104 °F (5 to 40 °C) Humidity 10% to 90% RH (noncondensing) Heat Dissipation 49 BTU/hr Product Manual — Doc. 8745D TSS-70 Series • 27...
  • Page 32 2.26 in. (57 mm) Dimensions do not include the mounting bracket or add-on accessories Weight 14.11 oz (400 g) Compliance Regulatory Model: M201923002 IC, CE, FCC Part 15 Class B digital device 28 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 33: Dimension Drawings

    Dimension Drawings Product Manual — Doc. 8745D TSS-70 Series • 29...
  • Page 34 4. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.

  • Page 35: Tss-1070 Specifications

    Product specifications for the TSS-1070 are provided below. Product Specifications Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365® software, Google Calendar™ calendaring app and G Suite™ software, CollegeNET® 25Live® software, and Ad Astra™ software (IBM® Notes® software...
  • Page 36 Requests 30 W (PoE+ Class 4) from an 802.3at Type 2 PSE without LLDP; Requests 15.4 W (PoE Class 0) from an 802.3af (or 802.3at Type 1) PSE NOTE: Enabling the USB port requires use of an 802.3at Type 2 PoE+ PSE. 32 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 37 2.01 in. (51 mm) Dimensions do not include the mounting bracket or add-on accessories Weight 1.61 lb (730 g) Compliance Regulatory Model: M201923003 IC, CE, FCC Part 15 Class B digital device Product Manual — Doc. 8745D TSS-70 Series • 33...

  • Page 38: Dimension Drawings

    Dimension Drawings 34 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 39 1. Actual functionality and onscreen appearance varies based on which scheduling app is in use and how the app is set up. The functionality described in this spec sheet generally refers to the Crestron Scheduling app. Each third- party provider determines the functionality and appearance of their respective app. Refer to each provider’s website for more information.

  • Page 40: Tss-1070-T Specifications

    16:10 WUXGA Resolution 1920 x 1200 pixels Brightness 400 nits (cd/m Contrast 1000:1 Color Depth 24 bit, 16.7M colors Illumination Edgelit LED with auto brightness control Viewing Angle ±80° horizontal, ±80° vertical 36 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 41 Requests 30 W (PoE+ Class 4) from an 802.3at Type 2 PSE without LLDP; Requests 15.4 W (PoE Class 0) from an 802.3af (or 802.3at Type 1) PSE NOTE: Enabling the USB port requires use of an 802.3at Type 2 PoE+ PSE. Product Manual — Doc. 8745D TSS-70 Series • 37...
  • Page 42 2.28 in. (58 mm) Dimensions do not include the mounting bracket or add-on accessories Weight 1.61 lb (730 g) Compliance Regulatory Model: M201923003 IC, CE, FCC Part 15 Class B digital device 38 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 43: Dimension Drawings

    4. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.

  • Page 44: Installation

    European electrical box, or a 2-gang U.K. electrical box. The touch screen also installs into drywall. NOTES: Additional mounting options are possible using the following mounting accessories. For more information, refer to the product pages at www.crestron.com. TSW-UMB-70 universal mounting bracket TSW-UMB-70-PMK preconstruction mounting kit TSW-UMB-70-BBI wall mount back box...

  • Page 45: Drywall Mounting

    3. Use one of the anchors to make a center mark in the drywall through the four 2-gang openings in the template. Refer to the image below for the required mounting holes. 4. Screw the four anchors into the drywall using the center marks as a reference. Product Manual — Doc. 8745D TSS-70 Series • 41...

  • Page 46: Install The Security Bracket (Optional)

    Use the two M2 x 4 mm screws to attach the security bracket to the touch screen rear housing as shown in the following illustration. 42 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 47: Connect The Touch Screen

    Observe the following when connecting the touch screen: Power and data connection is provided to the touch screen by a single Ethernet cable. A Crestron PoE (Power over Ethernet) power supply, such as the PWE-4803RU, or a PoE- capable network switch is recommended (neither included).

  • Page 48: Mount The Touch Screen

    Wipe the touch screen clean and avoid ingress of moisture beneath the bezels. 44 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 49: Configure The Touch Screen

    Configure the Touch Screen When power is applied for the first time, the touch screen boots with the Crestron room scheduling application selected by default. The touch screen may take up to two minutes to boot. Device settings for the touch screen may be configured using the built-in setup screens or the web configuration interface.

  • Page 50: Access The Device Setup Screens

    To access the web configuration interface using the touch screen IP address: 1. Ensure that the touch screen is connected to the network. 2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network.

  • Page 51: Create An Admin Account

    The first time the web configuration interface is accessed, a page is displayed asking the user to create an admin account. A similar message is displayed when connecting to the control system in Crestron Toolbox software if an admin account has not already been created. To create an admin account: 1.

  • Page 52: Set The Time Zone

    6. When prompted, reboot the touch screen. The touch screen reboots into the selected scheduling mode. An application may also be selected using the Application Selection function on the main device Setup screen. 48 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 53: Configure Microsoft Teams Panels

    1. Select a language for the application on the Language Selection screen. 2. Tap Next. The Time Zone Selection screen is displayed. 3. Select the time zone that will be used by the application on the Time Zone Selection screen. Product Manual — Doc. 8745D TSS-70 Series • 49...
  • Page 54 7. If two-factor authentication is enabled by your organization, follow the prompts provided to authenticate with the application. Upon successful sign in, the scheduling calendar for your organization is displayed. For more information on using Microsoft Teams, refer to https://support.microsoft.com/en- us/teams. 50 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 55: Configuration

    Update Firmware (on page 77). When power is applied for the first time, the touch screen boots with the Crestron room scheduling application selected by default. The touch screen may take up to two minutes to boot. Place five fingers on the display and hold for 20 seconds to display the main Setup screen (TSS- 770 shown).
  • Page 56 To configure the device using the built-in setup screens, refer to Local Configuration (on page 53). To configure the device using the web configuration interface, refer to Web Configuration page 75). 52 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 57: Local Configuration

    Setup screen and a Save & Exit button that may be tapped to save all settings, to exit the setup screens, and to return to the selected scheduling application. Product Manual — Doc. 8745D TSS-70 Series • 53...

  • Page 58: Ethernet Setup

    Tap REBOOT to exit setup mode and reboot the touch screen. To change a static IP address, tap Off under DHCP Enable. Then, tap Set Static IP Address Settings to display the Static IP Ethernet Setup screen. 54 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 59 Static IP Ethernet Setup Screen To edit the static IP address, the static subnet mask, the static default router, the preferred DNS, or the alternate preferred DNS, tap the text field underneath the setting name. Product Manual — Doc. 8745D TSS-70 Series • 55...
  • Page 60 Tap REBOOT to exit setup mode and reboot the touch screen. Tap < BACK to return to the Ethernet Setup screen. Tap < BACK on the Ethernet Setup screen to return to the Setup screen. 56 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 61: Application Selection

    Each application uses a unique setup procedure for registering and configuring the application. For more information on setting up each application, refer to Application Selection page 109). Tap < BACK to return to the Setup screen. Product Manual — Doc. 8745D TSS-70 Series • 57...

  • Page 62: Wi-Fi Setup

    Tap Set Hostname to enter a new touch screen hostname using an on-screen keyboard. Tap APPLY CHANGES to apply any new Wi-Fi settings to the touch screen and to stay in setup mode. Tap REBOOT to exit setup mode and reboot the touch screen. 58 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 63 To edit the static IP address, the static subnet mask, the static default router, the preferred DNS, or the alternate preferred DNS, tap the text field underneath the setting name. The on-screen numeric keypad opens for the chosen setting. Edit IP Address On-Screen Numeric Keypad Product Manual — Doc. 8745D TSS-70 Series • 59...
  • Page 64 Use the Connect to a Wi-Fi Access Point (1-2-3) screen to connect the touch screen to an existing WAP that is in range or to configure a new WAP. Any WAPs that are in range and discoverable are displayed under Step 1 - Select a WAP upon successful discovery. 60 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 65 6. Tap the Password text field to display an on-screen keyboard. 7. Enter the password used to connect to the WAP, and then tap SAVE. 8. Tap Step 3 - Make this my Access Point. The Wi-Fi WAP Selection screen is displayed. Product Manual — Doc. 8745D TSS-70 Series • 61...
  • Page 66 WAP may be deleted, or tap < BACK to cancel adding the new WAP. For more information, refer to Manage Wi-Fi Access Points (on the facing page). Tap < BACK to return to the Wi-Fi Setup screen. 62 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 67 Tap Delete this Access Point to delete the selected WAP. If a WAP is deleted, it must be added back to the list using the procedures described in Select a Wi-Fi Access Point (on page 60). Tap < BACK to return to the Wi-Fi Setup screen. Product Manual — Doc. 8745D TSS-70 Series • 63...

  • Page 68: Bluetooth Beacon

    Use the BLE Beacon screen to configure the built-in PinPoint™ proximity detection beacon. Using Bluetooth® technology, the beacon works with the Crestron App or Crestron PinPoint App to determine when a mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.

  • Page 69: Virtual Toolbar

    The toolbar is hidden automatically after a set timeout duration. NOTE: Virtual button functionality can be custom programmed using a Crestron control system. Product Manual — Doc. 8745D...
  • Page 70 Tap Toolbar Buttons to display a screen for showing or hiding individual buttons in the virtual toolbar. Tap On or Off next to a button to show or hide the button, respectively. 66 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 71 On-screen Toolbar Screen - Toolbar Buttons Tap < BACK to return to the Setup screen. Product Manual — Doc. 8745D TSS-70 Series • 67...

  • Page 72: Diagnostics & Advanced

    Use the Diagnostics & Advanced screen to access various diagnostic test screens for the touch screen. The Diagnostics & Advanced screen also provides the touch screen CPU temperature and available memory. Each test screen is described in the sections that follow. 68 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 73 Use the Test Pattern Diagnostics screen to display any of the available test patterns. Tap one of the buttons on the screen to display its respective test pattern. Tap < BACK to return to the Diagnostics & Advanced screen. Product Manual — Doc. 8745D TSS-70 Series • 69...
  • Page 74 Use the touch test screen to test the touch functionality of the display. When a location button is tapped, its respective indicator lights on the screen. Tap RETURN to return to the Diagnostics & Advanced screen. 70 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 75 The connection data updates after every successive ping. Tap < BACK to return to the Diagnostics & Advanced screen. Product Manual — Doc. 8745D TSS-70 Series • 71...
  • Page 76 The connection data updates after every successive ping. Tap < BACK to return to the Diagnostics & Advanced screen. 72 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 77: About

    NOTE: The Check For App Updates button is shown only if an application is running on the touch screen. Tap RESTORE at the top right of the screen to restore the touch screen to its default factory settings. Tap < BACK to return to the Setup screen. Product Manual — Doc. 8745D TSS-70 Series • 73...
  • Page 78 74 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 79: Web Configuration

    Connect to XiO Cloud Service (on page 111). To access the configuration interface: 1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network. 2. Open a web browser. 3. Enter the touch screen IP address into the browser URL field. The configuration interface is displayed (TSS-770 shown).

  • Page 80: Actions Menu

    Some device settings may be displayed or hidden depending on the selected application mode. If the Crestron room scheduling application is running on the touch screen, the web configuration utility provides additional configuration options for the room scheduling application. For more...
  • Page 81 Click Manage Certificates to manage any certificates that are installed on the touch screen. For more information on certificate management, refer to 802.1x Configuration (on page 106). Enter Setup Click Enter Setup to force the touch screen to enter its built-in setup interface. Product Manual — Doc. 8745D TSS-70 Series • 77...
  • Page 82 Project Upload dialog box opens. Project Upload Dialog Box NOTE: This selection is available only if the touch screen is running in Crestron Default scheduling mode. To upload a custom scheduling project: 1. Click Browse, and then navigate to the project .vtz file on the host computer.

  • Page 83: Status

    Click + More details at the bottom of the Device tab to display an expanded section that shows additional touch screen information. If + More Details is selected, click - Less details to collapse the section. Product Manual — Doc. 8745D TSS-70 Series • 79...
  • Page 84 IP Address: The touch screen IP address, shown only if an Ethernet connection is enabled Subnet Mask: The touch screen subnet mask address, shown only if an Ethernet connection is enabled Default Gateway: The gateway router address, shown only if an Ethernet connection is enabled 80 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 85 Click USB to view the status of a connected USB accessory, such as a room scheduling hallway sign or light bar. Status Tab - USB The following USB information is displayed: Accessory Connected: The name of the connected accessory Accessory Type: The type of connected accessory Product Manual — Doc. 8745D TSS-70 Series • 81...
  • Page 86 Room Status: The status of the connected room (available or reserved) Calendar Sync: The status of the sync between the touch screen and the room scheduling calendar Crestron Fusion Online Status: The status of the Crestron Fusion connection (if applicable) Display Click Display to view the display status.

  • Page 87: Settings

    Red text is displayed next a setting to indicate an invalid value. System Setup Click System Settings to configure general network and touch screen settings. Settings Tab - System Setup Product Manual — Doc. 8745D TSS-70 Series • 83...
  • Page 88 If an authentication method is selected, enter the ID for the key used to authenticate against the SNTP server into the Key ID text field. To remove an entry, fill the checkbox to the left of the table entry, and then click Delete. 84 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 89 Date Format: Select the format that the date will display on the touch screen using the drop-down menu. Time: Select the time for the touch screen (in 24-hour format) using the pop-up menu that is displayed. Product Manual — Doc. 8745D TSS-70 Series • 85...
  • Page 90 Settings Tab - System Setup (Network) NOTE: The IP Address, Subnet Mask, and Default Gateway fields are required only if DHCP is set to Disabled for Ethernet and Wi-Fi network connection. 86 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 91 Click Add to add a new entry to the Wi-Fi access point table. After selecting one more entries in the Wi-Fi access point table, click Remove to delete the selected entries. Product Manual — Doc. 8745D TSS-70 Series • 87...
  • Page 92 Click the + (plus) icon next to Device Display to display the following device display settings. Settings Tab - System Setup (Device Display) 88 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 93 Text Font Face: Use the drop-down menu to select a font for the screensaver text. Product Manual — Doc. 8745D TSS-70 Series • 89...
  • Page 94 Video URL: Enter a URL of video to be used by the touch screen screensaver. Logo Setting: Select one of the radio buttons (None, Crestron, and Custom) to select a logo type to use on the touch screen screensaver. Logo URL: If Logo Setting is set to Custom, enter a URL of a custom logo to be used by the touch screen screensaver.
  • Page 95 Cloud server. This connection is only applicable when the scheduling mode is set to Crestron Default or User Project. Crestron Fusion Cloud URL: Enter the URL used to connect the touch screen to the desired Crestron Fusion Cloud server. Product Manual — Doc. 8745D...
  • Page 96 HTTPS Proxy Port: Enter the port number of the HTTPS proxy server. Username: Enter the username required for the HTTPS proxy server. Password: Enter the password required for the HTTPS proxy server. 92 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 97 NOTE: For more information on the occupancy sensor, refer to the CEN-ODT-C-POE Supplemental Guide. For more information on configuring the occupancy source in the Crestron scheduling application, refer to the Crestron Room Scheduling Panels Operations Guide. Settings Tab – Device Pairing Device Model: Use the drop-down menu to select POE Occ Sensor.
  • Page 98 Media Volume: Enter a value (1‒100) for the touch screen media volume level. Beep Enabled: Turn on the toggle to mute the touch screen beep volume. Beep Volume: Enter a value (1‒100) for the touch screen beep volume. 94 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 99 Custom URL: Turn on the toggle use a custom update server URL. If turned off, the server URL will default to the standard Crestron update sever. Custom URL Path: If Custom URL Path is turned on, enter the custom URL path for the update server.

  • Page 100: Security

    Click the Security tab on the top left of the configuration interface to display selections for configuring security and authentication settings for the touch screen. Security Tab Selections Expand the Security accordion to configure the following settings: 96 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 101 After rebooting the touch screen, this username and password must be entered to access the web configuration utility or to connect to the touch screen through Crestron Toolbox™ software. CAUTION: Do not lose the administrator username and password, as the touch screen settings must be restored to factory defaults to reset the username and password.
  • Page 102 Enter the existing password in the Current Password field. Then, enter a new password in the Password field, and reenter the password in the Confirm Password field. Click OK to save the new password, or click Cancel to cancel the change. 98 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 103 Additionally, the number of users displayed on each page may be set to 5, 10, or 20 users. An Actions column is also provided for each user that allows various actions to be performed. The following selections may be selected from the Actions column. Product Manual — Doc. 8745D TSS-70 Series • 99...
  • Page 104 Click OK to return to the Authentication Management > Users page. Update User Click the editing button in the Actions column to edit settings for the selected user. The Update User dialog box is displayed. Update User Dialog Box 100 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 105 Actions column to delete the user. A pop-up dialog box is displayed asking whether the user should be deleted. Click Yes to delete the user or No to cancel deleting the user. Product Manual — Doc. 8745D TSS-70 Series • 101...
  • Page 106 A user must be added to an Active Directory group to be selected as an Active Directory user. Click OK to save any changes and to return to the Authentication Management > Users page. Click Cancel to cancel creating a new user. 102 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 107 Additionally, the number of groups displayed on each page may be set to 5, 10, or 20 users. An Actions column is also provided for each group that allows various actions to be performed. The following selections may be selected from the Actions column. Product Manual — Doc. 8745D TSS-70 Series • 103...
  • Page 108 Active Directory group in the Name field. If this information is being entered via console commands, omit domain\local from the command (for example, adddomaing - n:crestron -L:A instead of adddomaing -n:domain.local\crestron -L:A). Access Level: The access level of the group and its users...
  • Page 109 Active Directory Group: Turn on the toggle to use authentication via Active Directory for the group. Click OK to save any changes and to return to the Authentication Management > Groups page. Click Cancel to cancel creating a new group. Product Manual — Doc. 8745D TSS-70 Series • 105...

  • Page 110: 802.1X Configuration

    CAs as trusted CAs. Select Manage Certificates from the Action menu to add or remove CAs from the list. The Manage Certificates dialog box is displayed with the Root tab selected. 106 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 111 Click Add [Type] Certificate to add a CA of one of the four available types (Root, Intermediate, Machine, or Web Server) to the list of CAs. The Add Certificate pop-up dialog box is displayed. Add Certificate Dialog Box Product Manual — Doc. 8745D TSS-70 Series • 107...
  • Page 112 Clicking the x button before the CA file is uploaded to the touch screen cancels the upload. Click the x button to close the Manage Certificates dialog box and to return to the 802.1x Authentication page. 108 • TSS-70 Series Product Manual — Doc. 8745D...

  • Page 113: Application Selection

    Support for additional applications will be provided by future firmware updates. The touch screen runs only one app, which is selected at setup. Only the apps approved and delivered by Crestron may run on the touch screen. Product Manual — Doc. 8745D...
  • Page 114 For more information on using and setting up each application, refer to the provider's website. Note: 1. The application supports RFID functionality via the Crestron RFID-USB card reader. The RFID-USB installs next to the touch screen and connects to it over USB. Refer to the touch screen firmware release notes for more information on the supported RFID functions.

  • Page 115: Connect To Xio Cloud Service

    XiO Cloud® service allows supported devices across an enterprise to be managed and configured from one central and secure location in the cloud. Supported Crestron® devices are configured to connect to the service out of the box. Use of the service requires a registered XiO Cloud account. To register for an XiO Cloud account, refer to www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-Registration-...

  • Page 116: Operation

    The toolbar can be hidden by swiping up on the tab or is hidden automatically after a set timeout duration. On-screen Toolbar Screen (with Virtual Toolbar) 112 • TSS-70 Series Product Manual — Doc. 8745D...
  • Page 117 The following virtual buttons are provided by default and can be used to control the touch screen or the loaded application or program (if supported). Each button can be manually enabled or disabled in the local configuration pages. NOTE: Virtual button functionality can be custom programmed using a Crestron control system. Power : Powers the touch screen off.

  • Page 118: Resources

    Resources The following resources are provided for the TSS-70 Series. NOTE: You may need to provide your Crestron.com web account credentials when prompted to access some of the following resources. Crestron Support and Training Crestron True Blue Support Crestron Resource Library Crestron Online Help (OLH) Crestron Training Institute (CTI) Portal...
  • Page 119 This page is intentionally left blank. Product Manual — Doc. 8745D TSS-70 Series • 115...
  • Page 120 Product Manual — Doc. 8745D Crestron Electronics, Inc. 15 Volvo Drive, Rockleigh, NJ 07647 12/10/21 Tel: 888.CRESTRON Specifications subject to Fax: 201.767.7656 change without notice. www.crestron.com...

This manual is also suitable for:

Tss-770Tss-770-tTss-1070Tss-1070-tTss-1070-w-sTss-770-t-w-s-lb ... Show all

Table of Contents