Crestron TSS-70 Series Product Manual page 14

The TSW-770/1070-RMB-1 andTSW-770/1070-RMB-2
l
for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000,
LC-1000, TPS-4L, or TPS-2000L) without having to tear out the old mounting hardware
or patch the wall.
Thought not typical for most scheduling applications, the
l
mount kit can be used to mount the touch screen into a 19 in. rack. When installed, the
touch screen occupies three rack spaces.
Notes:
1. Microsoft determines the functionality and appearance of the Microsoft Teams room scheduling application.
Refer to the Microsoft website for more information.
2. Additional subscriptions and/or licenses may be required. Refer to the Microsoft website for details about the
capabilities and requirements of its scheduling application and services. The TSS-770-T cannot be interfaced with
a control system and cannot be custom programmed for any other functionality. An internet connection is
required.
3. The TSS-770-T may be powered by either a PoE or PoE+ power source when a light bar or hallway sign is
connected. Refer to the Accessories section for a list of all available options. Refer to each accessory's spec sheet
for further information.
4. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control,
multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are
specifically programmed and configured to work with them.
5. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and
TSW-BBI series back boxes, allowing the TSS-770-T to be installed in place of a previous generation touch screen.
10 • TSS-70 Series
retrofit mounting brackets allow
TSW-570/770-RMK-1
Product Manual — Doc. 8745D
rack