Set The Time Zone; Select An Application - Crestron TSS-70 Series Product Manual

Set the Time Zone

The time zone must be set on the touch screen prior to selecting a scheduling application.
To set the time zone:
1. Access the web configuration interface using either the touch screen IP address or the XiO
Cloud service.
2. Select the Settings tab.
3. Navigate to System Setup > Time/Date.
4. Select the time zone where the touch screen will be used from the Time Zone drop-down
menu.
5. Click Save Changes on the top right of the screen.

Select an Application

The touch screen ships with various built-in scheduling applications. An application may be
selected from the web configuration interface.
The touch screen included in the TSS-770-T-LB or TSS-1070-T-LB kits runs the Microsoft Teams
Panels scheduling application only. No other application can be selected on these models.
NOTE: Applications can be selected and configured from the device setup screens or from the
web configuration interface at any time. For more information, refer to
(on page 109).
To select a touch screen application:
1. Enter the touch screen IP address into a web browser to access the web configuration
interface.
2. Navigate to Settings > Applications.
3. Select the desired scheduling provider from the Application Mode drop-down menu.
4. If necessary, enter any additional information (such as a registration URL) that is required
for connecting to the scheduling provider.
5. Click Save Changes on the top right of the screen.
6. When prompted, reboot the touch screen. The touch screen reboots into the selected
scheduling mode.
An application may also be selected using the Application Selection function on the main device
Setup screen.
48 • TSS-70 Series
Application Selection
Product Manual — Doc. 8745D