Crestron TSS-70 Series Product Manual page 39

Notes:
1. Actual functionality and onscreen appearance varies based on which scheduling app is in use and how the app is
set up. The functionality described in this spec sheet generally refers to the Crestron Scheduling app. Each third-
party provider determines the functionality and appearance of their respective app. Refer to each provider's
website for more information.
2. Refer to the firmware release notes for a list of all scheduling apps that are supported by that firmware release.
3. Additional subscriptions and/or licenses may be required. Refer to each provider's website for details about the
capabilities and requirements of its scheduling application and services. Third-party apps typically run on the
TSS-1070 as they do on a tablet device. The TSS-1070 runs only one app, which is selected at setup. Only the
apps approved and delivered by Crestron can run on the TSS-1070. The TSS-1070 cannot be interfaced with a
control system and cannot be custom programmed for any other functionality. An internet connection is
required.
4. The TSS-1070 must be powered by a PoE+ power source when a light bar or hallway sign is connected. Refer to
the Accessories section for a list of all available options. Refer to each accessory's spec sheet for further
information.
5. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control,
multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are
specifically programmed and configured to work with them.
6. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and
TSW-BBI series back boxes, allowing the TSS-1070 to be installed in place of a previous generation touch screen.
Product Manual — Doc. 8745D TSS-70 Series • 35