Crestron TSS-70 Series Product Manual page 36

Illumination
Viewing Angle
Touch Screen
Buttons
Virtual Buttons
Reset
Audio
Features
Connectors
LAN PoE
USB
NOTE: The touch screen supports the use of a single light bar or status indicator accessory.
Power
PoE (Power over
Ethernet)
32 • TSS-70 Series
Edgelit LED with auto brightness control
±80° horizontal, ±80° vertical
Projected capacitive, 5-point multitouch capable
(6) Virtual buttons in collapsible universal tool bar, per-button show/hide,
preconfigured with icons for Power, Home, Lights, Up, Down, and Microphone
Pin hole on rear panel for hardware reset
Built-in speakers for touch feedback and alerts
(1) 8-pin RJ45 connector, female, with 2 LED indicators;
100BASE-TX Ethernet port;
PoE+ PD port;
Green and yellow LEDs indicate Ethernet port status
(2) USB Type A connectors, female;
USB 2.0 host ports;
For optional room scheduling accessories
IEEE 802.3at Type 2 compliant PoE+ PD (Powered Device);
Normally requests 15 W from an 802.3at Type 2 PSE with LLDP advanced
power management;
With room scheduling and USB enabled, requests 18 W from an 802.3at Type 2
PSE with LLDP;
Requests 30 W (PoE+ Class 4) from an 802.3at Type 2 PSE without LLDP;
Requests 15.4 W (PoE Class 0) from an 802.3af (or 802.3at Type 1) PSE
NOTE: Enabling the USB port requires use of an 802.3at Type 2 PoE+ PSE.
Product Manual — Doc. 8745D