Page 2
Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
5”/7”/10.1” Touch Screens: TSW-550/750/1050 Access the Setup Screens The “Setup” menu is the starting point for configuring the TSW-550, TSW-750 and ® TSW-1050 touch screens from Crestron NOTE: If no project has been loaded or if an invalid project has been loaded, the touch screen defaults to the “Setup”...
Page 6
About button that provides information about the touch screen and a Save & Exit button. The functions of each are detailed in the next section of this guide. 2 • 5”/7”/10.1” Touch Screens: TSW-550/750/1050 Configuration Guide – DOC. 7366C...
To edit the Static IP Address, Static Subnet Mask, Static Default Router, Preferred DNS or Alternate Preferred DNS, touch the button directly under the label for the entry to edit. The on-screen numeric keypad opens. Configuration Guide – DOC. 7366C 5”/7”/10.1” Touch Screens: TSW-550/750/1050 • 3...
“Setup” menu. IP Table Setup On the “Setup” menu, touch IP Table Setup to display the “Ethernet Setup – IP Table” menu. “Ethernet Setup –IP Table” Menu 4 • 5”/7”/10.1” Touch Screens: TSW-550/750/1050 Configuration Guide – DOC. 7366C...
Page 9
Touch Save to save a new entry to return to the “Ethernet Setup – Edit IP Table Entry” screen. Touch the field below IP Address/Hostname to display the on-screen keyboard. Configuration Guide – DOC. 7366C 5”/7”/10.1” Touch Screens: TSW-550/750/1050 • 5...
“Audio Setup” Screen The “Audio Setup” screen provides controls for muting (or unmuting) the audio, adjusting level for both Master Volume and Media Volume, as well as a control for 6 • 5”/7”/10.1” Touch Screens: TSW-550/750/1050 Configuration Guide – DOC. 7366C...
Off controls for Hard Key Wakes LCD. Touch to return to the “Setup” menu. Standby Timeout On the “Setup” menu, touch Standby Timeout to display the “Standby Timeout” screen. “Standby Timeout” Screen Configuration Guide – DOC. 7366C 5”/7”/10.1” Touch Screens: TSW-550/750/1050 • 7...
These are explained in the paragraphs that follow. Keypad Test On the “Diagnostics” menu, touch Keypad Test to display the “Diagnostics – Keypad Test” screen. “Diagnostics – Keypad Test” Screen 8 • 5”/7”/10.1” Touch Screens: TSW-550/750/1050 Configuration Guide – DOC. 7366C...
Page 13
NOTE: When touching the screen during calibration, be as accurate as possible. Touch to return to the “Diagnostics” menu. Calibrate On the “Diagnostics” menu, touch Calibrate to initiate the screen calibration procedure. Refer to “Touch Test” above for details. Configuration Guide – DOC. 7366C 5”/7”/10.1” Touch Screens: TSW-550/750/1050 • 9...
Page 14
The “Diagnostics - Rava” screen provides controls for testing the use of Crestron’s Rava™ SIP Intercom with the TSW-550/750/1050. They can be used to test projects and settings. If the intercom works but the project does not, there is an issue with the project;...
“Setup” menu. Save & Exit On the “Setup” menu, touch Save & Exit to save all settings, exit the setup screens and return to the main project. Configuration Guide – DOC. 7366C 5”/7”/10.1” Touch Screens: TSW-550/750/1050 • 11...
Page 16
Crestron Electronics, Inc. Configuration Guide – DOC. 7366C (2033269) 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON 06.13 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.