Table of Contents
Advertisement
Local Configuration
Refer to the following sections for information about configuring the device locally using its
built-in setup screens.
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the touch screen.
To access the touch screen's built-in setup screens during regular operation, place five fingers on
the display and hold for 15 seconds.
The main Setup screen is displayed (TSS-770 shown).
TSS-770 Setup Screen
The Setup screen shows the IP address and hostname of the touch screen and provides the
following configuration selections:
Buttons for Ethernet setup, application selection, Wi-Fi® network setup, diagnostics,
l
Bluetooth® beacon configuration, and the virtual toolbar.
An About button that provides information about the touch screen.
l
The functions of each button are detailed in the following sections.
NOTE:
A toolbar is present on the bottom of all setup screens. The toolbar provides a gear
button
that may be tapped to return to the Setup screen and a Save & Exit button that
may be tapped to save all settings, to exit the setup screens, and to return to the selected
scheduling application.
Product Manual — Doc. 8745D
TSS-70 Series • 53
Advertisement
Table of Contents
