Crestron TSS-70 Series Product Manual page 18

Wall Mount Options
Using the bracket provided, the TSS-1070 is easily installed over a 2-gang or 3-gang US electrical
box, or a 2-gang European or UK electrical box. A security latch option is included to deter
unauthorized removal of the touch screen.
Additional wall mounting options are available using the optional
mounting bracket, TSW-UMB-70-PMK
back box (sold separately).
Optional Mounting Accessories
The TSS-1070 supports numerous optional mounting accessories (sold separately) that allow the
touch screen to be installed in all kinds of installations:
The TSW-1070-MSMK
l
mounted directly to virtually any flat surface, which is ideal for mounting at the entrance
to a meeting space for room scheduling applications.
The TSW-770/1070-MUMK allows the touch screen to be attached to the mullion of an
l
interior glass wall, window, or partition.
The TSW-770/1070-RMB-1,TSW-770/1070-RMB-2, and
l
mounting brackets allow for retrofit installations in place of an older Crestron touch
screen (APAD, CT-1000, LC-1000, TPS-4L, TPS-6L, or TPS-2000L) without having to tear
out the old mounting hardware or patch the wall.
Thought not typical for most scheduling applications, the
l
kit can be used to mount the touch screen into a 19 in. rack. When installed, the touch
screen occupies four rack spaces.
The TSS-1070 is also compatible with Wall-Smart® flush wall mount products via a partnership
with Crestron. For more information on supported Wall-Smart hardware, click here.
Notes:
1. Actual functionality and onscreen appearance varies based on which scheduling app is in use and how the app is
set up. The functionality described in this spec sheet generally refers to the Crestron Scheduling app. Each third-
party provider determines the functionality and appearance of their respective app. Refer to each provider's
website for more information.
2. Refer to the firmware release notes for a list of all scheduling apps that are supported by that firmware release.
3. Additional subscriptions and/or licenses may be required. Refer to each provider's website for details about the
capabilities and requirements of its scheduling application and services. Third-party apps typically run on the
TSS-1070 as they do on a tablet device. The TSS-1070 runs only one app, which is selected at setup. Only the
apps approved and delivered by Crestron can run on the TSS-1070. The TSS-1070 cannot be interfaced with a
control system and cannot be custom programmed for any other functionality. An internet connection is
required.
4. The TSS-1070 must be powered by a PoE+ power source when a light bar or hallway sign is connected. Refer to
the Accessories section for a list of all available options. Refer to each accessory's spec sheet for further
information.
5. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control,
multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are
specifically programmed and configured to work with them.
6. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and
TSW-BBI series back boxes, allowing the TSS-1070 to be installed in place of a previous generation touch screen.
14 • TSS-70 Series
preconstruction mounting kit, and
6
multisurface mount kit allows a TSS-1070 touch screen to be
TSW-UMB-70 universal
TSW-UMB-70-BBI
TSW-1070-RMB-3 retrofit
TSW-1070-RMK-2 rack mount
Product Manual — Doc. 8745D