Web Configuration - Crestron TSS-70 Series Product Manual

Web Configuration

The touch screen may be monitored and configured using the included web configuration
interface. The configuration interface is accessible from a web browser if the touch screen IP
address is known.
The web configuration interface is also accessible through the XiO Cloud® service. For more
information, refer to
To access the configuration interface:
1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen
and its IP address on the network.
2. Open a web browser.
3. Enter the touch screen IP address into the browser URL field. The configuration interface
is displayed (TSS-770 shown).
NOTE: If authentication is enabled for the touch screen, an administrator username and
password must be entered prior to accessing the web configuration interface. For more
information on configuring authentication settings, refer to
Web Configuration Interface
The configuration interface provides the following tabs:
Status: Used to monitor touch screen status
l
Settings: Used to configure touch screen settings
l
Security: Used to enable authentication and other security settings
l
802.1x Configuration: Used to configure IEEE 802.1x network authentication for touch
l
screen security
Product Manual — Doc. 8745D
Connect to XiO Cloud Service (on page 111).
Authentication (on page 97).
TSS-70 Series • 75