Crestron TSS-70 Series Product Manual page 99

Auto Update
Click Auto Update to configure automatic firmware updates for the touch screen.
NOTE: The Auto Update accordion can be used to configure auto update settings for firmware
only. Automatic application updates are not affected by these settings.
Settings Tab - Auto-Update
Auto Update: Turn on the toggle to use automatic firmware updates.
l
Custom URL: Turn on the toggle use a custom update server URL. If turned off, the server
l
URL will default to the standard Crestron update sever.
Custom URL Path: If Custom URL Path is turned on, enter the custom URL path for the
l
update server.
Day of Week: Select the day of week when the touch screen will check for updates. Select
l
Daily to have the touch screen check for updates every day.
Time of Day: Enter a time of day (in 24-hour format) when the touch screen will check
l
updates on the scheduled day.
Poll Interval: Enter the polling interval (in hours) for when the touch screen will poll the
l
server for updates.
Click Update Now to check the update server for new firmware and to update the touch
l
screen immediately if new firmware is available.
Cloud Settings
Click Cloud Settings to enable or disable a connection between the touch screen and an XiO
Cloud® service account. A connection to the XiO Cloud service is enabled by default.
Product Manual — Doc. 8745D TSS-70 Series • 95