High Mounted Stop Lamp (Led Type) Bulb Replacement; License Plate Lamp Bulb Replacement - Kia CEED Owner's Manual

Maintenance
High mounted stop lamp (LED
type) bulb replacement
If the high mounted stop lamp (LED)
(1) does not operate, have your vehi-
cle checked by a professional work-
shop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamp cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the high mounted stop lamp
(LED), for it may damage related
parts of the vehicle.
8 112
License plate lamp bulb
replacement
OCD078063
1. Remove the lamp assembly by
using a flat-blade screwdriver.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb from bulb-socket
by pulling it out.
4. Insert a new bulb by inserting it
into the bulb-socket.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
6. Install the lamp assembly to the
lamp housing.
OCD078064