F" Group: Main Profile Parameters - Hitachi L100 Instruction Manual

Trip Event and History Monitoring
Func.
Code
D08
D09

"F" Group: Main Profile Parameters

Func.
Code
F01
F02
F03
F04
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com
Technologies Inc.
The trip event and history monitoring feature lets you cycle through related information
using the keypad. More details about trip event monitoring are on page 6–5.
"D" Function
Name
Trip event monitor Displays the current trip event.
information.
Trip history monitor Displays the previous two
events and their causes.
The basic frequency (speed) profile is
defined by parameters contained in the "F"
group as shown to the right. The set
running frequency is in Hz, but accelera-
tion and deceleration are specified in the
time duration of the ramp (from zero to
maximum frequency, or from maximum
frequency to zero). The motor direction
parameter determines whether the keypad
Run key produces a FWD or REV command. This parameter does not affect the intelli-
gent terminal FWD and REV functions, which are already separate.
"F" Function
Name
Output frequency Standard default target
setting frequency that determines
constant motor speed
Acceleration 1 Standard default acceleration
Deceleration 1 Standard default deceleration
Motor direction Two options; select codes:
00 .. Forward
01 .. Reverse
Run-
time
Description
Edit
—
—
Output
frequency
F01
Run-
time
Description
Edit
L100 Inverter
DOP,DRW,DOP+
Range
and
Func.
Name
Units
Code
— Mon. ERR1
— Mon. ERROR
COUNT,
ERR2,
ERR3
F02 F03
time
DOP,DRW,DOP+
Range
and
Func.
Name
Units
Code
0 to 360 Mon. FS, 2FS,
Hz TH, VR,
1 to 15S
0.1 to Mon. ACC1
3000 sec.
0.1 to Mon. DEC1
3000 sec.
00, 01 Mon. F/R-Select
3–9