Hitachi L100 Instruction Manual page 154

Parameter Settings for DOP/DRW/DOP Plus
L100 series inverters provide many functions and parameters which can be configured
by the user. We recommend that you record all parameters which have been edited, in
order to help in troubleshooting or recovery from a loss of parameter data.
Monitor Mode Parameters
Monitor Mode Setup
Func.
Code
Mon. Frequency setting
Acceleration time
Deceleration time
Frequency setting
Frequency source select
Scaled frequency value
Output current display
Reactive current display IO 0.00A
Manual torque boost
Torque boost frequency
setting
Torque boost mode
Output voltage gain adj.
Jog frequency
Jog mode select
Analog adjustment
Panel display selection
Terminal monitor
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com
Technologies Inc.
Inverter model L100
MFG. No.
Name
TM 000.0 0.0Hz
ACC1
DEC1
F-SET-SELECT TRM
F/R-SELECT TRM
/Hz01.0
Im 0.0A 0.0%
V-Boost code 11
V-Boost F 10.0%
V-Boost Mode 0
V-Gain
Jogging 1.00Hz
Jog Mode
ADJ
PANEL
TERM LLL LLLLLL
Displayed Default Setting
-FE (Europe)
TM 031.6 0.0Hz
0010.0s ACC1
0010.0s DEC1
F-SET-SELECT TRM
F/R-SELECT TRM
0.00 /Hz01.0
Im 0.0A 0.0%
IO 0.00A
V-Boost code 11
V-Boost F 10.0%
V-Boost Mode 0
100% V-Gain
Jogging 1.00Hz
0 Jog Mode
080 ADJ
d01 PANEL
TERM LLL LLLLLL
L100 Inverter
}
This information is printed
on the specification label
located on the right side of
the inverter.
User Setting
-FU (USA)
0010.0s
0010.0s
0.00
100%
0
080
d01
B–7