F" Group: Main Profile Parameters - Hitachi SJ100 Series Instruction Manual

Trip Event and History Monitoring
The trip event and history monitoring feature lets you cycle through related information
using the keypad. More details about trip event monitoring are on page 6–5.
"D" Function
Func.
Name
Code
D08 Trip event monitor
D09 Trip history monitor

"F" Group: Main Profile Parameters

The basic frequency (speed) profile is
defined by parameters contained in the "F"
group as shown to the right. The set
running frequency is in Hz, but accelera-
tion and deceleration are specified in the
time duration of the ramp (from zero to
maximum frequency, or from maximum
frequency to zero). The motor direction
parameter determines whether the keypad
Run key produces a FWD or REV command. This parameter does not affect the intelli-
gent terminal FWD and REV functions, which are already separate.
"F" Function
Func.
Name
Code
F01 Output frequency
setting
F02 Acceleration 1
F202 Acceleration 1, 2nd
motor
F03 Deceleration 1
F203 Deceleration 1, 2nd
motor
F04 Motor direction
Description
Displays the current trip event.
information.
Displays the previous two
events and their causes.
Output
frequency
Description
Standard default target
frequency that determines
constant motor speed
Standard default acceleration
Standard default acceleration,
2nd motor
Standard default deceleration
Standard default deceleration,
2nd motor
Two options; select codes:
00 .. Forward
01 .. Reverse
SJ100 Inverter
DOP,DRW,DOP+
Run- Range
time and
Func.
Edit Units
Code
— — Mon.
— — Mon.
F02
F01
DOP,DRW,DOP+
Run- Range
time and
Func.
Edit Units
Code
✔
0 to 360 Mon.
Hz
✔
0.1 to Mon.
3000 sec.
✔
0.1 to Mon.
3000 sec.
✔
0.1 to Mon.
3000 sec.
✔
0.1 to Mon.
3000 sec.
✘
00, 01 Mon.
3–9
Name
ERR1
ERROR
COUNT,
ERR2,
ERR3
F03
time
Name
FS, 2FS,
TH, VR,
1 to 15S
ACC1
2ACC
DEC1
2DEC
F/R-Select