Advertisement
To set the optimum picture position on the EVF picture.
Symptom of Misadjustment:
The EVF picture will be shifted.
Test Point: ----------
Adjustment: Deflection Yoke Centering Magnet
Specification: The picture position becomes centered on the EVF picture
INPUT: Gray Scale Chart
Mode: SP REC
Equipment: Viewfinder
Adjustment Procedure:
1. Aim the camcorder at the gray scale chart.
2. Adjust the Deflection Yoke Centering Magnet by turning them so
that the picture is centered in the Viewfinder.
7.3.8.3. Brightness Adjustment
Purpose:
To set the optimum EVF brightness level.
Symptom of Misadjustment:
The EVF picture will be too white or black.
Test Point: ----------
Adjustment: VR903 (EVF C.B.A.)
Specification: Natural Gradation
INPUT: Color Bar Chart
Mode: SP REC
Equipment: Viewfinder
Adjustment Procedure:
1. Aim the camcorder at the color bar chart.
2. Adjust the BRIGHTNESS CONTROL (VR903) so that the
brightness in the Viewfinder becomes natural gradation.
7.3.8.4. Focus Adjustment
Purpose:
To set the optimum focus on the EVF picture.
Symptom of Misadjustment:
Fig. E5-3
98
Advertisement
