Advertisement
Reflection Chart Set (VFKS003-N)
(Reflection Chart Set consists of Gray Scale Chart (VFKS003A),
Color Bar Chart (VFKS003B), Registration Chart (VFKS003C), and
Resolution Chart (VFKS003D))
Gray Scale Chart (VFKS003A)
Color Bar Chart (VFKS003B)
Registration Chart (VFKS003C)
Resolution Chart (VFKS003D)
Color Chip Chart (VFKW0116)
26. Color Temperature Conversion Filter 80A or equivalent Color
Temperature Conversion Filter
27. Color Compensating Filter CC05M
28. A.W.B. Adjustment Fixture (VFKW0066)
7.3.4. PREPARATION
1. Connect the Interface Box to the TP Board Kit with Camera
Connecting cable (VFKW1000B).
2. Connect the Interface Box to the Personal Computer with RS-
232C cable (VFKW1000C or VFKW1000D).
3. Connect the TP Board Kit to S301 on the camcorder. Refer to "
HOW TO USE TP BOARD
4. Connect the AC Adaptor and camcorder, and apply
DC +6 V to the Interface Box.
5. Power on the camcorder.
Note:
In case that the camcorder is in DEMO mode, release DEMO mode
as follows:
Power off the camcorder first. Then, disconnect the TP Board Kit,
Fig. E1-5
KIT" in "SERVICE NOTES."
92
Advertisement
