Advertisement
Digital Still Camera (continued)
Picture in Picture Wipe Title
Captured still images can be recorded
along with the current picture.
1
MODE
Still image
SP
P - P
Moving
Picture
P20
Multi image playback page number
STILL
DEL
PLAY
REW
STOP
2
3
PHOTO
VCR
CAMERA
OFF
Digital Still Camera (continued)
PhotoShot Title Library
The included 8 MB CompactFlash Card
already contains 12 pre-recorded titles.
You can insert any one of the 12 included
pre-recorded titles into your current video
recording by following the steps outlined
below.
CAUTION:
If you delete the following
pre-recorded titles, they
will not be restored.
Panasonic
Bon Voyage
Congratulations
It's a Girl!
Surprise!
Before you begin...
Connect Camcorder to power source.
Insert the CompactFlash Card.
Set POWER to CAMERA.
( P - P = Picture in Picture )
1
Set DIGITAL SELECT to DIGITAL
WIPE.
A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
If there are no recordings on the
card, NO PICTURE appears
on-screen.
2
Press + (FF) or - (REW) to select
still image to be used.
3
Start recording.
When recording starts, Multi image
playback number disappears. Then
the capture still images can be
recorded along with the current
picture.
To exit from the Picture in Picture
Wipe title mode, press MODE.
Note:
If CompactFlash Card is not inserted,
NO CF CARD appears on-screen. Set
FF
Power to OFF, then insert the
CompactFlash Card.
Pictures captured with other brand
products cannot be used with this
Camcorder.
If INCOMPATIBLE IMAGE appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
If Picture in Picture Wipe Title selected,
the following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.I.S.,
Still/Strobe/Wide.
Before you begin...
Connect Camcorder to power source.
Insert the CompactFlash Card.
Set POWER to CAMERA.
1
Set DIGITAL SELECT to DIGITAL WIPE.
2
Press + (FF) or - (REW) to select still
image to be used.
3
Start recording.
Anniversary
Happy Birthday
Graduation
It's a Boy!
Our Wedding
The Wedding
Vacation!
Digital Wipe Mode
Insert a Captured still image into the current recording, or vice versa, in one of three
wipe effects.
2
3
SP
P - P
P - P
P - P
P20
MODE
MODE
WIPE 1
WIPE 2
WIPE 3
(Current Recording)
(Current Recording)
START
START
(first press)
(first press)
WIPE 1
WIPE 1
WIPE 2
WIPE 2
WIPE 3
WIPE 3
(Captured image)
(Captured image)
(Captured image)
(Captured image)
START
START
(second press)
(second press)
WIPE 1
WIPE 1
WIPE 2
WIPE 2
WIPE 3
WIPE 3
(Current Recording)
(Current Recording)
PC Connection
Digital PhotoShot Software
A live or captured image can be transferred to your PC (Personal Computer).
System Requirements for Digital PhotoShot
PC-Camcorder Connection
Connect Camcorder PC jack to the serial
port on your PC (Personal Computer)
using the supplied PC connector cable.
Refer to PC or Windows manual to identify
which COM port to be used for connection.
RS-232C Serial Port
(Default is COM1)
(D-Sub 9-pin)
PC Connector
cable
(supplied)
Before you begin...
Connect Camcorder to power source.
Insert the CompactFlash Card.
Set POWER to CAMERA.
1
Repeat step 1 and 2 on previous steps
to set Picture in Picture Wipe title.
2
Press MODE repeatedly for Wipe
effect 1, 2, or 3 (See left).
WIPE 1 will flash for a while to store
the image for the wipe.
3
Press START:
once
inserts captured image.
twice
inserts current recording
picture.
You can freeze the wipe in progress
by pressing START. Press START
again to resume wipe.
Note:
If CompactFlash Card is not inserted,
NO CF CARD appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
Pictures captured with other brand
products cannot be used with this
Camcorder.
If INCOMPATIBLE IMAGE appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
If Digital Wipe mode is selected, the
following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.I.S.,
Still/Strobe/Wide.
Before you begin...
Note:
• Be sure to turn PC off before connection
for properly image transfer.
• After Camcorder and PC are connected
by starting up the software included,
video recording is not possible.
PC Connector
Advertisement
