Advertisement
together of your clothes fabric or the lifting of your foot from a
carpeted floor can generate static electricity (ESD) sufficient to
damage an ES device).
3. X-RADIATION (Model: A, C, D)
WARNING :
1. The potential source of X-Radiation in EVF sets is the High
Voltage section and the picture tube.
2. When using a picture tube test jig for service, ensure that jig is
capable of handling 10 kV without causing X-Radiation.
NOTE :
It is important to use an accurate periodically calibrated high
voltage meter.
3. Measure the High Voltage. The meter (electrostatic type) reading
should indicate 2.2 kV±0.1 kV. If the meter indication is out of
tolerance, immediate service and correction is required to prevent
the possibility of premature component failure. To prevent an X-
Radiation possibility, it is essential to use the specified picture
tube.
4. OPERATION GUIDE
5. SERVICE NOTES (PLEASE READ)
5.1. SERVICE NOTES
5.1.1. EXTENSION CABLES FOR SERVICE
NOTE:
1. When using the cassette tape:
A. Be sure to remove a cassette lid cover of cassette tape.
B. Be sure to install the Lock Screw to Cassette Up Unit. After
servicing, be sure to remove the Lock Screw.
Refer to
"HOW TO HOLD THE CASSETTE UPUNIT IN THE
DOWN POSITION WITHOUT CASSETTE COVER
5
INSTALLED."
Advertisement
