Advertisement
5.1.8.3. How to install TP Board Kit to Camcorder:
1. Remove a Screw and remove the EVR Cover. Then, open the
Cassette Cover by sliding the EJECT button with Power ON, or
sliding the Lock Lever through TP Board slot. Remove the
Cassette Cover for "Tape Interchangeability adjustment," OR
release only 2 Locking Tabs (L-1) of the Cassette Cover for "EVR
Adjustment." Refer to
ASSEMBLY PROCEDURES.
2. Slide the CF Card Connector Unit as shown.
"CABINET
SECTION" in DISASSEMBLY/
Fig. 5-2
21
Advertisement
