Advertisement
Also, by pressing
7.3.7. VR ADJUSTMENT
7.3.7.1. CAMERA SECTION
7.3.7.1.1. Frequency Adjustment (Model: A, B, C)
Purpose:
To set the chroma subcarrier.
Symptom of Misadjustment:
The picture will be no color. (The burst shifts)
Specifications:
14.31818 MHz±80 Hz
Adjustment Procedure:
1. Remove the Side Case (L) Unit. Refer to
DISASSEMBLY/ASSEMBLY PROCEDURES.
Connect the Side L FPC unit to the camcorder as shown in Fig. E5-
1
2. Connect the Frequency counter to TP601 of Main C.B.A.
3. Adjust C610 on the Main C.B.A. so that the frequency becomes
14.31818 MHz±80 Hz.
key, "Sub Menu" can be seen in order below.
Fig. E4-2
"CABINET
Fig. E5-1
96
SECTION" in
Advertisement
