Advertisement
How to read chart shown above:
A: Order of Procedure steps.
When reassembling, perform steps(s) in reverse order. These numbers are also used as the
identification (location) No. of parts in Figures.
B: Part to be removed or installed.
C: Fig. No. showing Procedure or Part Location.
D: Identification of part to be removed, unhooked, unlocked, released, unplugged, unclamped,
or unsoldered.
3(S-1) = 3 Screws (S-1), 2(L-1) = 2 Looking Tabs (L-1)
6.1.2.1. Cassette Cover Unit with LCD Unit
Fig. D2
29
Advertisement
