Advertisement
PC Connection (continued)
Software Installation
(Windows 95/98)
PC Connection (continued)
Using Live Image Data
You can capture the current Camcorder
picture to your PC.
Before you begin...
1
Turn on PC (Personal Computer) and
start up Windows.
2
Insert Digital PhotoShot disk
(Windows 95/98) into a floppy disk
drive.
3
4
5
Follow instructions as they appear on
PC screen until the installation is
complete.
Note:
.
Before you begin...
Insert the CompactFlash Card.
Make Camcorder-PC connections.
Turn your PC on.
Set Camcorder POWER to PHOTO.
1
Repeat step 1 and 2 on previous
section to run the Software.
2
3
Repeat this step to decide on an
image.
Captured image is transferred to
your PC when
is clicked
on.
4
Click on Window, then select
Live photo Zoom In.
5
Captured image is stored to your
PC.
Note:
If, while transferring the image to your
PC, the displayed picture appears
abnormal, restart the PC application and
turn Camcorder POWER off, and then
back on.
Running the Software
(Windows 95/98 )
Using CF Card Image Data
Pictures captured with Camcorder can be
transferred to your PC.
Note:
If, while transferring the image to your
PC, the displayed picture appears
abnormal, restart the PC application and
turn Camcorder POWER off, and then
back on.
Before you begin...
1
2
Note:
Refer to Help for information about
application operation and other
Error messages.
Before you begin...
Insert the CompactFlash Card.
Make Camcorder-PC connections.
Turn your PC on.
Set Camcorder POWER to PHOTO.
1
Run the Software.
2
screen appears.
3
Select the image data you want to
transfer to your PC.
The selected image will be
underlined in green.
4
Click on:
Transfer
The picture image is transferred
to your PC and displayed.
Delete
The picture image is deleted.
Save...
The picture image is transferred
to your PC and displayed.
Save window appears.
Advertisement
